I am attempting to upload my file through Acrobat.com to really views but I keep obtaining the subsequent error message:

C:eallclearCapacitive-Hulk-AutoDaily-Win32-Release-SAdevsourcecmponentsziputilisCPInternalZipUtilits.cpp 705

Unknown exception

What do you think is the problem with my Adobe Captivate file that is causing this problem?  Whenever I click the 'Retry" button, the same thing happens.  If I click 'Cancel' the following message says, "File failed to upload to Acrobat.com."what can I do? Please help me, I am beginning to feel frustrated. Thank you in advance for your assistance.

I am attempting to assess the efficiency of a XenDesktop for use in my company as I believe the utilization of this product will most definitely resolve a few of our concerns in relation to several desktop applications. At any rate, in establishing the Proof of Concept (PoC), I have faltered on a matter that I do not have the slightest notion of arriving at a solution and 10 hours has already elapsed. Adhering to guidelines entirely, I have the whole thing arranged in the subsequent arrangement. Below is the error message that I encountered during the process.

Desktop Studio

Hi experts,
 
We have tried this morning, in vain, to install LD 7.3.1 on Server 2008 R2.  We've searched carefully all the forums and used all the activities but we're still facing the 2869 error.
 
We are registered as Admin and opened the msi as Administrator.  We're still trying to use elevated command prompt.  Below is my setup:

I have AutoCAD Map 3D 2011 and every time I am trying to plot a drawing, the error “You cannot use multiple instance of program at the same time” appeared.

And then Map 3D will freezes for a short moment and when it came back the plot was canceled.

I also have AutoCAD 2012 but I already tried to remove it ever since I got this error, but unluckily it doesn’t fix the issue.

The background plot is set to 1.

Need help! Thanks.

 Hi

My associate's CMM is not running well. I have some experience with the CMM and the following is a depiction of the error problem.

In first the B&S PFx CNC CMM, the machine and computer are opened.

The PC-DMIS 4.3 software is running.

Then the probe and stylus combination are established.

The PC DMIS prompt states “Do a machine start (if needed), then press OK to home”

The green “MACH START” on the controller is dejected and indicator light runs.

The “OK” button is selected.

The grey activity bar of the screen instantly shows the following error code.

“TR_FG16e OVERSPEED ERROR”

Hello experts

I have just installed the program and also bought the Pro version. It works fine, but when I try to enter the activation code it will give the following error message:

Activation Failed.Error code -24

I don’t know what this error means. In picture effect, I can use the picture.  Need your help. Thanks.

Hi

Three nights ago I was using TrakAxPC and it was running well. But this evening, when I tried to open it, I was warned that my install doesn’t contain a license code. When I press “Enter License Code” and re-enter my information, I get this following error:

Activation Failed… Error code -11

Please help. Thanks.

Hi

I am facing some problems when I attempt to drop feed into the meldas mo on a Leadwell MCV-550-e Mill.

When I entered the program number in in/out screen and hit 1 for RS-232 with DC to 1 and hit input I received an "ERROR OVER LABEL" message. I don’t know how to solve it. But if I go on to hit input it does read subsequently till the end of program is read.

If I go to the search screen and enter the program value and hit input, the alarm light goes on and in diagnosis I get 201 messages DEVICE I/F ERR. The message is either I/O malfunction, I/O power off, error transfer speed, or error in dc code setting.

Hi experts

Recently I got a CNC Mill that was built in 1986. It uses a Fanuc 0 Mate Controller. This is my initial experience with CNC, and I'm facing some problems.

By using Mastercam 9, I built a simple program, got that seemingly fine in MC, classified the tools, etc., that were verified fine, and applied the Post Processor MPFAN.pst and generated the NC file.

Moreover I use the baud rate set OK in MC9 and prepared a serial port cable. By using the serial port when I started downloading a program from my PC to the Mill, I found an Error Code 071.

Hi experts,

I installed 2 PCI-6225 using NI-DAQmx drivers V. 8.5.0f5 in one PC and received the following error message:

"Software error occurred in MIG software. Status Code: -229665."

The error occurs when I set my application in the Windows Startup folder (Start > Programs > Startup) and at startup the application runs automatically. It runs well when I stop the application and restart it manually. 

Then I reinstalled the Measurement Studio for VS2005 and the DAQmx drivers but couldn’t resolve the problem. One of the most important things is that when the system starts up I am able to running this application automatically.

Please help.

Thanks a lot.