N/APosted on - 05/27/2015
I have a netis router in my home to use Wi-Fi but it shows a very weak internet connection. So, I went to my ISP to fix the problem and it works properly at the office of my ISP but it doesn’t get connected at my home when I try to connect. Why is this problem occurring?
Why is my router not working properly?
Try to run an anti-virus and check your PC whether it is affected.
Go to ‘Start’-> Device manager-> confirm that you have installed all the device driver software for PC. If anything is not there or outdated, try to download and install or update the software.
Keep windows up to date.
Check all the installed programs. Check for AMD quick stream program. If it is there uninstall the program, restart the computer. Problem will solve.
Step 1: Turn off the router, modem and PC. Then turn on the modem and wait to stabilize the light. After that, turn on the router and then PC.
Step 2: See the internet connection.
Step 3: Then remove all the network profiles and search for a new one.
Step 4: check browser setting and remove if any proxy settings.
Step 5: PC connected with router. Go to start->run->CMD.
Step 6: Type ‘IPCONFIG /ALL. Press enter.
Step 7: Right click on the command window. Choose ‘Select All’. Press enter. And paste the result in a message.
Step 8: Then download and run ‘Xirrus WiFI Insspector, click the network link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error about a missing function, download and install NET Framework.
Do speed test to test the internet speed, if you are getting speed then problem will be with your computer.
Try to reset the router by pressing the ‘Default’ button for 8-10 seconds, when the router is powered ON. Then the router will reboot and all configurations will go back to the factory default.
Step 1: Open the browser->type the IP address of the router (192.168.1.1).
Step 2: Go to ‘System Tools’->’Factory Defaults’->click on ‘Restore’. If you are getting a ‘Netis Page’ on the screen then, Click on ‘Advanced’->’System Tools’->’Factory Defaults’->click on ‘Restore’.
Step 3: Wait up to restart the device. After rebooting, all setting will replaced by factory default.