We have opened a new site and we bought 150 generic computer system. All the units don’t have an operating system so I want to know if I can create and install a Windows 7 image. If so, what is the easiest way to do this? Does Microsoft have support for this? What are the links for downloading? Please help.

I was using a 9861 NI-XNET module in a CompactDAQ form factor configured for FPGA mode with a DMA FIFO. However, when the FPGA VI was compiled, an error message (see screenshot below) popped up during the generation of intermediate files.

Any advice on how to get rid of the problem?

Code Generation Error

Items with Errors

FPGA.vi

Errors

The current target does not have sufficient DMA control line sets available

I was using the LabVIEW FPGA Module and LabVIEW to create VIs on FPGA targets. However, while changing and saving items under the FPGA target in the project, I got this error message (see screenshot below). I wondered why this happened because I have already tested the same changed item before and it worked. 

Anyone from this forum who could help me resolve the error? 

Error -61017 occurred at Open FPGA VI Reference in UDV RT.vi

Possible reason(s):

I was installing LabVIEW 8.6 to a new PC with Win 7 but it failed sending a build error message (see screenshot below). 

I tried it for several times but the error seemed to happen again and again. 

Can you please help solve the error?  

Thanks in advance.

Build Errors

The build was unsuccessful.

Possible reasons

An error has occurred. Expand the Details section for more information.

Details

***************

******Error: Windows SDK function returned an error. (Error code -12)

I was configuring NI PXI-4110 with LabVIEW when I got this error message below. 

I am a fairly new to this field, and I couldn’t figure out how to resolve the issue. 

I searched the internet but couldn’t find any resolution for my exact problem. 

Can you help? 

Error -1074134971 occurred at Property Node

(arg 2) in Untitled 3

Possible reason(s):

The channel or repeated capability name is not allowed.

Attribute: NIDCPOWER_ATTR_MEASURE_WHEN, Channel:0

Hi,

I was debugging XDS100v1 emulator with Code Composer Studio v3.3.  I tried a new target configuration but I got this error message (see below).  I have verified the target configuration and seemed okay.  I have reset the emulator and I still got the same error.  I searched the internet for answers but couldn’t find one.  I hope anyone from this forum could help me solve the problem.  I may have missed something. Thanks.

Texas Instruments XDS100v1 USB Emulator_0/C28xx

Error connecting to the Target:

(Error -1135 @0x0)

Hi Experts,

I was trying to power on a VM via Vcenter when I encountered this error message below (months ago).

So I restarted the host then it was fine. 

However, I started getting the error again which seemed intermittent. 

Got any solution to get rid of the error message permanently? 

I depend on you guys. Please help. 

Thanks in advance.

Power On virtual machine

The operation is not allowed in the current connection state of the host.

I bumped into this error message while recording a composition using Pro Tools 9 on my Mac. 

The operating system held off interrupts for too long. If this occurs frequently, try increasing the “H/W Buffer Size” in the Playback Engine panel. (-6086)

 

First time I came across with the above error that I had to search the internet for answers.  Unfortunately, I did not get any solution.  So, I chanced upon this forum and would like to ask help from you expertise. 

Can you give advice on how to resolve the problem?

 

I have been trying to hook up my device with HP Photosmart D71000 series.

However, while trying to install the software, I keep getting this error message; software cannot be installed using the ‘Run as’ command.

It also suggests that it should be logged in with admin privileges, tried it but the same error message pops-up.

I have been searching the internet on how to solve this problem but found nothing.

Can someone help me?

Thank you!

Today, while bench testing an AWAC that I have been successfully configured and tried sending a new deployment set-up (planning) to the instrument, an error message appeared from the AST software.

The error is, "Error 142: unable to enter data acquisition mode, Prolog communication problem when opening file" and  "Error 138: Prolog communication problem when reading production configuration, press connect to restore communications". I attempted to do the process again and the instrument seemed to remain confirming the latest data strings at the planned interval to the terminal emulator. It appeared that the wave data strings ($PNORW string identifier) were unable to appear to the programmed interval.