0x00000e9 Windows 7 Error Message

0x00000e9 Windows 7 Error Message

When an external device is removed from the computer, or the operating system could not detect the hard disk, then an error occurs, which is known as 0x00000e9 Windows 7 error. It can also occur due to an invalid BIOS setting, and this error conveys that the system has a problem in communicating with the hard drive. The screenshot of the error is below:

The steps to fix 0x00000e9 error are as follows:

• Modify your BIOS Settings.

1. Restart the system and enter to BIOS setting by pressing F1, F2, F10, ESC or DEL.
2. Select Optimal Load Defaults.
3. Configure setting to IDE or AHCI by clicking on Advanced option.
4. Restart your computer.

• Repair Windows.

• Restart your PC in safe mode.

1. Enter into WinRE

Now, press the power button for 10 seconds to go to boot from the operating system and repeat this process three times, and in the third time, it will go to the “Automatic Repair” option. If the problem is not fixed, then enter WinRE by clicking on the Advanced option. Now try another option for repairing.

2. Restart your system now.

• Unplug the external device.

Remove the external device and check that error resolves or not. If you found the error is fixed, then change the peripheral device.