Various Steps Of Pcie Training Error Integrated Raid In Brief.

Various Steps Of Pcie Training Error Integrated Raid In Brief.

Hey,

The steps for pcie training error integrated raid is as follows:

• First you need to remove the network card and the error may rise maybe for the same.
• Next check the RAM i.e. in all of 6 RAM and test any one of them too
• Check the RAM one after the other
• Next check the CPU as well.
• There are in all 2 CPU so check them one after the other as well.

Various Steps Of Pcie Training Error Integrated Raid In Brief.

The full error reads:

“PCIe Training Error: Integrated RAID. System halted!”

When you encounter this error, the system will not boot and you will receive the message above. This problem was encountered on Dell R620 Security Analytics server. The cause of the problem is one of the following components which may have failed:

• The slot on the motherboard that the RAID controller uses.
• The internal RAID controller.

The only workaround, according to broadcom.com’s support page, is to try to reseat the internal RAID controller and see if that helps. If the problem continues, you should contact Blue Coat Support for assistance with a hardware RMA.