Hello!
Every time I start an app, it prompts me to check for an Internet connection through the Connective Manager. Is it possible for me to activate WiFi or even  the mobile Internet in the background, so that my apps would not have to check for it every single time?
I hope you can help me.
Thank you.
Hi Lisa,
You should configure it so that anytime you connect to internet it will automatically connect.Â
Follow these steps to configure internet connection using Windows:
1. Unfreeze your computer before you do these steps.
 2. On the host computer
1. Click Start > Control Panel.
2. Click Network and Internet Connections.
3. Right Click Network Connections that you use. If you connect to the internet using modem > right-clickÂ
4. Click Properties.
5. Click Advance Tab
6. Click Internet Connection sharing, if you are sharing dial-up, select the Establish a dial-up connection.
7. Click Ok.
The network adapter that is connected to your LAN should configure with this default 192.168.0.1 and subnet should 255.255.255.0
You can also view on your Windows Media Player on how to do this if it's difficult for you.He client computer
Here is the other way how to connect the Internet by using the shared connection, you must confirm the LAN adapter IP configuration, and then configure the client computer. Follow these steps:
Â
1.  Log on to the client computer as Administrator
2.  Click Start>Control Panel>Network and Internet Connections. Click Network Connections.
3.  Right-click Local Area Connection and then click Properties.
4.  Click the General tab> Internet Protocol (TCP/IP) in the connection uses the following items list, and then click Properties.
5.  Click Obtain an IP address automatically then click OK.
 IP Address 192.168.0.2
 Subnet mask    255.255.255.0
  Default gateway 192.168.0.1
IP Address         192.168.0.2 Â
Â
To configure the client computer to use the shared Internet connection, follow these steps:
1.  Click Start >Control Panel.
2.  Click Network and Internet Connections.
3.  Click Internet Options.
4.  Click the Setup button.
5.  On the Welcome to the New Connection Wizard page, click Next.
6.  Click Connect to the Internet > click Next.
7.  Click Set up my connection manually, and then click Next.
8.  On the Completing the New Connection Wizard page, click Finish.
9.  Quit Control Panel.
You can activate WiFi or even mobile Internet application by following this steps make sure you set the correct IP address, the subnet etc. Make sure you have a good ISP.
Thanks,
Henry
You can turn on the Wi-Fi feature of your device to activate the wireless capability. This acts as standby and alternate way to access the Internet if the Internet connection lost Internet access.
When app is started, it will automatically search for Internet access because it's link that needs real-time Internet updates.
You'll need to activate the Airport's Wi-Fi access. You will need to join to the network that you own, and it needs you to add your wireless network name of SSID. Most wireless connection uses network security key or encryption code, this use either WEP or WPA standard code. But some prefer not to secure there wireless connections because they may not aware of this feature of simple decide not to.
Add a wireless connection, set-up SSID and type the network security key's WEP or WPA. Join this network so everytime your Internet connection encounter Intermittent connection of no connection at all, by any means, you have an alternate way to activate the app using Wi-Fi features.
