After powering the computer boots but no display is shown. I replaced the graphics card and was unsuccessful.
I also removed the CMOS battery,reset it and ram also but it failed.
What to do with this problem?
No display is showing after starting computer.
To resolve black screen issues after powering the computer on:
-
Remove any external devices like floppy disks, CDs or DVDs, external hard drive, flash drives, USB drives, memory cards that are attached to the computer.
-
Turn the system on without those external devices attached to it.
-
If the issue persists, turn the computer back off and then unplug all external peripherals like speakers, printers, scanners, camera, and others and just leave the basic peripherals attach to the system like the keyboard, the mouse, the monitor and the power supply.
-
Restart your computer in safe mode.
-
Scan your computer and make sure that any threats to the system are remove.
-
Check the master boot record and repair it.
For further assistance on how to check and repair your master boot record, and your OS installation which may also cause the problem, please go to https://support.microsoft.com/en-us/products/windows.
Answered By
mazhar
0 points
N/A
#140719
No display is showing after starting computer.
Set the monitor cable in CPU and plug out the RAM from CPU clean the slots of RAM in CPU and then plug in RAM and restart your computer if the problem is still their then install a fresh window.
