How To Replace Your Laptop Hard Disk Drive?
Planning to upgrade your laptop’s hard disk drive? Want to do it on your own? Well, with right tools and expertise, you shouldn’t have any problem replacing your laptop’s hard disk drive. Here we have detailed the entire process. Follow the exact procedure, and you’d be able to successfully upgrade your hard disk drive.
Opening Your Laptop Case
The first thing to do for replacing hard disk drive is to open laptop case and reveal the slot where your HDD is fitted. Simply flip over the machine and you’ll see a panel towards the bottom secured using a screw. This is where the hard disk drive is found.
Start by removing the battery by sliding the latch/latches to unlock them and push your laptop’s battery out. Gently remove it without applying much force.
It is recommend to use Phillips-head screwdriver in the next step for unscrewing the panel that covers the hard drive and RAM. It is likely that the panel will still be secured even after you have removed the screws. You’ll have to pry it away from the remaining chassis of the laptop with the help of sharp knife. Move it around clockwise and detach the plastic completely to let the panel go loose.
Replace The Hard Drive
Different laptops secure the hard drive differently, but most of them use 2-4 screws to do so. The screws are often visible and you have to simply unscrew them.
Once the screws are removed, lift up the tab that is attached to your hard drive. Slide the hard drive out slightly to ensure that it is detached from its SATA socket and then lift it out. Unscrew to take the drive out of its cage and remove it completely.
Just follow the same steps in reverse order to install the new hard drive. Put it in the cage and use screws to secure it. Slide the cage back in and screw it up. Also ensure that all screws-hole line up too. If that’s not the case, it is likely that you haven’t slid the drive back in completely into the SATA connection. It is also possible that you haven’t properly installed it into the cage. However, if everything is fine and the drive is attached to the SATA socket, simply put all the screws back on and you’re good to go.
It is recommended that if you don’t have enough expertise, you resort to professionals Laptop repairs Master Computer to get the job done for you. They will make sure that the entire process goes seamlessly and you have your upgraded laptop ready to use in no time.