Need Help about Network Card

Asked By 0 points N/A Posted on -

When I type #dmesg | grep eth  there is no eth network interface, and here is the result:

[ 34.763244] Driver 'sd' needs updating – please use bus_type methods
[ 34.763332] sda:<4>Driver 'sr' needs updating – please use bus_type methods

I just want to adjust the IP, but there is no interface network.

Please help.

Answered By 20 points N/A #94445

Need Help about Network Card


Respected member of “techyv” Alexreynolds try to follow these steps:

1. Open up side case of you CPU, if that is external card then pull the Line Card out and try to clean its dust especially from bottom part and clear the dust from the inner slot of Motherboard where your Line cards fits with old tooth brush.

2. If your Line card is internal and fix as modern system has then just unplug cable from Modem and try to clear the slot where Modem cables pin and reset again in the slot.

3. You must be aware what kind of Line Card you are using, go to and search its update drivers, download it and install it.

4. Update your windows through automatic update configuration.

Login/Register to Answer

Related Questions