N/APosted on - 01/22/2012
When I attempt to connect to the Hyperterminal and error message is coming.
Please see the screen shot to see the error message.
Please help me to solve this problem. I will thankful for all help and support.
PBX Hyper Terminal
Hyperterminal Connection Error – No Carrier
This error seems that your cable is not connected correctly and the data transfer from the Micro chip and is not receiving.
You need to replace the cable if you have already check the cable is connected properly and if still it does not work then change the code of the chip. May the chip is not serially sending the data. So you need to check your cable and also the code and you must confirm that you are sending the data through right pin of the chip. These are the options you may check these options.