Error comes out after Gear Pro reads ddp file

Asked By 10 points N/A Posted on -
qa-featured

Hi,

Here I have a DDPid file v1.0 completed on a sadie workplace.  This DDP picture refers to a picture.DAT file. Gear Pro (http://64.62.159.82/) can read those files but after that the following error happens:

ERROR: Track 12 error (image file c:mcd1IMAGE.DAT, Offset 693202608 bytes, track size 79688112 bytes):
;Track size and image offset do not match with actual file length (772537920 bytes).
;Log file closed at 2008 10 03 12:11

Please help me solve this. Thanks a lot.

SHARE
Answered By 0 points N/A #96610

Error comes out after Gear Pro reads ddp file

qa-featured

Hi

This error is supposed due to the following possibilities:

1. The image you are saying might have the large image size then the option available on the server you are putting

2. The image you are putting has the big name therefore it might not able to work. This is because as you have written the name of the image it is too long it might create the problem so you should check this out and rename the image file and put the small name on the back end where from you are taking this image in your database.

3. The image is of the such type that it cannot appear on the site, may the extension of the image is not supported by the database or the server or the backend of the site.

4. The image file may be corrupted find and replace the image file once and then maybe it will work properly but do this after checking all the above options

These are the options check out these and match with the image file and make it confirm that you have done all these steps do one by one step and after each step check out that the image file appears properly or not.

Login/Register to Answer

Related Questions