I want to make a dial-up connection using a phone line. I'm having hard time doing it. There's always an error to my every attempts. How to set-up dial-up connection using a phone line? 'm hoping for your help.
on Thu, 2012-04-05 23:52
In our school, we have tried to install new smart boards SB680. I have completed with the driver installation of smart board but when I try to install notebook software from CD or yet download the file from internet, it gives me the error message during the installation:
The installation did not succeed Exit Error Code 1613.
Please tell me, why I am getting this message. It's very irritating when same error happens repeatedly.
on Tue, 2012-02-21 17:59
My associate's CMM is not running well. I have some experience with the CMM and the following is a depiction of the error problem.
In first the B&S PFx CNC CMM, the machine and computer are opened.
The PC-DMIS 4.3 software is running.
Then the probe and stylus combination are established.
The PC DMIS prompt states “Do a machine start (if needed), then press OK to home”
The green “MACH START” on the controller is dejected and indicator light runs.
The “OK” button is selected.
The grey activity bar of the screen instantly shows the following error code.
“TR_FG16e OVERSPEED ERROR”
on Wed, 2012-02-15 23:39
I have installed Bluetooth Dongle and it was working properly. Then I installed Nokia PC Suite. Now I am receiving an error message whenever I attempt to connect. The message reads: Cannot use the connection type.
Please help me. Thanks a lot.
on Thu, 2012-02-02 13:07
Hi all experts
Last night I got some water spilled over my i-phone accidentally. Since then its speaker is not functioning properly. I think it may be a Word problem. Can anyone help me with a viable solution?
on Thu, 2012-01-26 02:03
Hello. I would just like to ask about my headphone jack in my new ThinkPad Edge E520. It has only one jack which is very unusual to me. I usually notice two jacks in most devices like this, one for the microphone and one for the earpiece I suppose. What I have in my mind is that maybe this jack has a dual function for both microphone and earphone. But I am having a 2-jack headset here. Can I still use this? Will it damage my device if I try plugging it there? I think I can use wireless headset but I prefer to use the wired one. Or is there some sort of adapter I could use? I don’t want to try plugging my headset because I’m afraid it could damage the jack. Any suggestions?
on Wed, 2011-12-21 19:32